Features
1. Building a real-time system with Windows CE 4.2!
FA applications require a high real-time property.
Windows CE is a "scalable operating system that combines real-time property", which was developed for embedded devices by Microsoft Corp..
2. Easy ladder edited with PLAD! "On site, quickly, easily"
Using PLAD (our ladder editing software) enables you to edit ladder "on site, quickly, easily".
We provide PLAD free of charge.
3. Equipped with a rich interface with an emphasis on extensibility!
It is equipped with an Ethernet, the MECHATROLINK-II, USB ports, a CF card slot, serial I / Fs, I / O ports, and an expansion bus.
Moreover, installation of a variety of expansion boards and softwares is possible.
4. Compatible with MECHATROLINK-II! Easy wiring! Wire-saving!
The fieldbus for motion control MECHATROLINK-II makes it possible to connect all the servo drive in one wiring.
Precise synchronization control and high-speed control between the servos can be easily realized, and it can connect up to 16 axes.
5. Resistant to vibration! Safe to sudden power-off! Excellent environmental resistance!
It is resistant to vibration, and the OS won't be broken in case of sudden power-off because a Flash rom is adopted.
It combines a high environmental resistance since it does not use the vulnerable equipment to vibration such as a hard disk.
6. Easy data backup with using a USB memory!
Since two ports of the USB interface are mounted, you can easily use the storage such as USB memory for data back up.
7. Outstanding openness! Screen software, PLC can be constructed even by the customers!
Because Windows is installed, customers can easily develop applications (VC).
We provide the development environment free of charge.
Specifications
Basic Specifications
Specifications |
Ambient temperature |
Operation temperature |
0 to 50℃ |
Storage temperature |
-20 to 70℃ |
Humidity |
30 to 85 ℃ RH or less (no condensation) |
Power supply |
DC 5V±5% (2.0Amax)
DC 12V±5% (0.8Amax) |
Atmosphere |
Without corrosive gas, dust or the like |
Cooling |
Natural air cooling |
Functional specifications
Specifications |
CPU |
SH7750R (SH4) 240MHz |
OS |
Windows CE 4.2 (Japanese version) |
Memory |
FLASH ROM |
32MB (For OS storage) |
SDRAM |
64MB (User area: approx. 40MB) |
SRAM |
128KB (Battery backup is possible.) |
Display |
TFTpanel、VGA (640 × 480 dots / 64K color) |
Touch panel |
Analog method, Resolution: 12 bit |
Calendar Clock |
Dedicated battery: lithium battery (CR2032) ± 2 minutes / month |
Audio |
Buzzer output |
Interface |
Field Network |
Mechatrolink II |
Ethernet |
10BASE-T (1 port) |
USB |
USB1.1 host (2 ports)
Correspond only to storage class
Full-speed (12Mbps)
Supports Low-speed (1.5Mbps) |
Serial |
RS232C / RS422, 485 (select with switch) |
Memory card |
CF card slot (1 slot) |
Expansion bus |
Mounting × 1 option board (private bath) |
General-purpose I/O port |
Rated voltage |
24V±5% |
Input |
Number |
4 (photo coupler) |
Input current |
5mA |
OFF voltage |
5V and below |
Output |
number |
4 (photo coupler) |
Maximum load |
50mA |
Motion specifications
Specifications |
Maximum number of control axes |
16 axes |
Transmission cycle |
1msec (1 to 7 stations), 2msec (8 to 15 stations) , 4msec (16 to 30 stations) |
Command system |
Position command, speed command, torque command, inverter instruction |
Feed |
Positioning, linear interpolation (simultaneous 16 axes), circular interpolation (select 2 axes)
Helical interpolation JOG, homing, manual pulser (2CH) |
Command unit |
Pulse |
Maximum command value |
± 2147483647 |
Speed command unit |
pulse / sec |
Acceleration and deceleration function |
Linear, asymmetric, S-shaped, index |
Correction function |
Backlash compensation, pitch error correction |
PLC specifications
Specifications |
Program method |
Relay symbol system |
Input-output control system |
Refresh method |
Program memory |
FLASH ROM |
Program capacity |
65000 steps |
Arithmetic processing speed |
Basic instruction 0.25μs / step |
Constant scan |
5-200ms (1ms units) |
Basic instruction |
24 types |
Application Instructions |
83 types |
Input (X) |
1024 (X0 to X63F) |
Output (Y) |
1024 (Y0 to Y63F) |
Internal relay (M) |
16000 (M0 to M999F) |
Indirection register (Z) |
8 (Z0 to Z7) |
Special relay (E) |
from E200 |
Timer (T) |
1024 (T0-T1023)
Low speed (1000ms), medium speed (100ms), high speed (10ms) |
Counter (C) |
1024 (C0 to C1023), 16-bit up counter |
Data register (D) |
14000 words (D0 to D13999) |
System reserved area
D14000 to D14999: user input area
D15000 to D15999: user output area |
Master Control Relay (MC) |
8 |
Battery backup |
Data register, internal relay and counter area are set by the parameter.
(It requires a external backup battery.) |
* The contents of this specification are subject to change without prior notice for product improvement.